NWWT Event Calendar

Events in orange have been recorded. Click on the event for the link to the recording.

Upcoming events

  • Bowl Turning 201 - Plate/Platter Class - Q1-2026

    • 28 Feb 2026
    • 8:30 AM - 4:00 PM
    • 24250 SW 65th Ave, Tualatin OR 97062.
    • 0
    Join waitlist


    Bowl Turning 201 - "Plate/Platter" Class


    Saturday, February 28, 2026

    8:30am - 4:00pm

    Dave Wood's Shop
    24250 SW 65th Ave, Tualatin OR 97062.

    Requirements and general information

    • Students must be members of NWWT
    • Class will be limited to 7 students - one per lathe
    • Instructors are experienced NWWT members
    • Sharpening systems will be available
    • All wood will be supplied
    • Students bring their own PPE (face shields, dust protection)
    • Coffee and snacks will be provided, but bring your own lunch.

    Course Objectives:  

    The primary objective of this course is to refine your skills in the finer details of plate and platter turning.  When you look at a plate or platter, your eye is very discerning.  You will learn optimal shapes, rim designs, and base options.  Skills learned here will help you advance to the next level of expertise. 

    Each student should complete one piece in class. Sanding and finish application included, time permitting.

    Prerequisite Skills

    If you have not yet developed the skills below or are unsure, please attend an open shop and talk with one of the helpers before registering for this course.

    • Ability to prepare and mount a bowl blank between centers, and in a chuck using a tenon or a recess
    • Ability to shape the outside and inside using a bowl gouge
    • Ability to use a scraper for smoothing surfaces
    • Ability to complete a basic bowl except for sanding and applying finish

    Agenda

    Morning
    • Tune-up/sharpen tools for the class with help from the staff.
    • Presentation on advanced design and form concepts, shape, rims, bottoms
    • Review of bowl gouge grinds: 40/40, traditional (50°), bottom (65°-75°), Ellsworth, etc
    • Mounting options: when to use a tenon or recess
    • Turn a “once-turned” bowl through the finish-cutting stage with a green blank

    Lunch Hour:
    Additional Demonstrations and Q&A session during lunch

    Afternoon

    • Turn a roughed and dried blank supplied (or bring your own) to the point of final scraping:
    • Learn methods for truing warped tenon or recess for re-mounting
    • Learn methods of cutting thinner wall thickness
    • Learn methods of scraping thin-walled bowls
    • Discuss sanding and finishing options if time permits


    Tools to bring

    • Bowl gouge(s) – ½” or 5/8” are good sizes. If you have several with different grinds, bring them all.
    • Bowl scraper – left hand French curve style is ideal for inside, but a round-nose also works
    • Parting tool or skew for fine-tuning tenons/recesses
    Show details

  • Spindle Turning 201 -Goblet Class - Q1-2026

    • 01 Mar 2026
    • 8:30 AM - 4:00 PM
    • 24250 SW 65th Ave, Tualatin OR 97062.
    • 2
    • 5 registrants
    Register

    Spindle Turning 201 - "Goblet"  Class


    Sunday, March 1, 2026

    8:30am - 4:00pm

    Dave Wood's Shop
    24250 SW 65th Ave, Tualatin OR 97062.

    Requirements and general information

    • Students must be members of NWWT
    • Class will be limited to 7 students - one per lathe
    • Instructors are experienced NWWT members
    • 4 Sharpening systems will be available
    • All wood will be supplied
    • Students bring their own PPE (face shields, dust protection)
    • Coffee and snacks will be provided, but bring your own lunch

    Course Objectives
    The primary objective of this class is to teach additional spindle turning skills. There are a variety of techniques learned in this class that are applicable to many other types of turning projects. 

    We will introduce you to use of the skew in this class.

    Prerequisite Skills:  If you have not developed the skills described below or are unsure, attend an open shop session and discuss it with one of the helpers before registering for this course.  Skills required are:

    • Use of a rouging gouge to round square stock.
    •  Use of a spindle gouge to make beads and coves
    •  Use of a parting tool.

    Agenda

    • Sharpen all tools used for the class with help from the instruction staff.
    • Practice beads and coves with the spindle gouge as a warm-up exercise
    • Discussion of pepper mill designs from simple to more complex, hollowing techniques and tools

    Tools you need to bring

    • Spindle Roughing Gouge 1” or larger is ideal.  ¾” is ok.
    • Spindle gouge:  ½” or 3/8”.  Bring both if you have them
    • Parting tool: 1/8” diamond profile is very versatile, but thin kerf (1/16”) is also useful.
    • Small round-nose scraper or box scrapper
    • Skew: 1” or larger
    Show details

  • NWWT General Meeting - Joe Fleming - Air Brushing

    • 05 Mar 2026
    • 7:00 PM - 9:00 PM
    • Remote Zoom meeting & MAC

    March 5, 2026 Meeting
    7:00pm - 9:00pm

    Hybrid Meeting - live at the MAC and on Zoom

    HERE

    Joe Fleming will demonstrate "air brushing" finishing techniques on wood turned projects. Joe is an accomplished woodturner and expert at embellishing using paints . He will demonstrate various types and brands of equipment, and discuss the various kinds of paints commonly used.

    He will be here Friday and Saturday for classes.

    Register for the 1-day class for beginners HERE

    Reguster for the 1-day advanced class HERE.

      


      Show details

    • Basics of Air Brushing With Joe Fleming

      • 06 Mar 2026
      • 9:00 AM - 4:00 PM
      • 24250 SW 65th Ave, Tualatin, OR 97062
      • 2
      Register

      Basics of Air Brushing with Joe Fleming

      The goal for the class is to learn how to make your turnings stand out with color, designs such as scenic views, or other ideas.

      All equipment is provided.  Joe will have some used equipment available for sale.

      • Learn how to get started and the cost for a basic system
      • Learn how to use and maintain an airbrush
      • Learn what types of airbrushes are available and advantages and disadvantages of each type
      • Learn what paints are best for airbrushing
      • Learn basic color theory
      • Leave with the ability to use airbrushing on your current project

      To cancel your registration within 2 days of the class.

      • ·       Go to your Profile (click on your name in the upper right
      • ·       Click on Events
      • ·       Click on the class you want to delete and click on Cancel Registration
      • ·       Your fee will be refunded but be sure to check your account.


      Show details

    • Advanced Airbrushing With Joe Fleming

      • 07 Mar 2026
      • 9:00 AM - 4:00 PM
      • 24250 SW 65th Ave, Tualatin, OR 97062
      • 2
      Register

      Advanced Air brushing With Joe Fleming

      For those who have used airbrushing, this class will take you to the next level.  Adding color is great but this class will really make your turnings stand out.

      All equipment is provided.  Joe will have some used equipment available for sale.

      If you have an airbrush, please bring it.

      • Learn how to make colors work well
      • Learn how to avoid color and technical blunders. 
      • Exercises in the class are designed to reinforce good color planning and technique,
      • Much much more

      To cancel your registration within 2 days of the class.

      • ·       Go to your Profile (click on your name in the upper right
      • ·       Click on Events
      • ·       Click on the class you want to delete and click on Cancel Registration
      • ·       Your fee will be refunded but bed sure to check your account.



      Show details

    • NWWT Open Shop -- Dave Wood's Shop

      • 14 Mar 2026
      • 9:00 AM - 1:00 PM
      • 24250 SW 65th Ave, Tualatin OR 97062
      • 0
      • 7 registrants
      Join waitlist

      Open Shop is directed toward the new turner but all are welcome.  Bring a project you want help finishing.  Bring questions about methods, tools, designs or any other woodturning question.  There are seven lathes available for use.  Bring your own tools and wood or buy wood at the shop.  

      We will have three sharpening stations to help you perfect your sharpening technique. There is no more important topic for the new turner (or the old ones for that matter) than sharpening. 

      YOU DO NOT NEED TO REGISTER FOR OPEN SHOP

      Registration guarantees you use of a lathe, and others can use one when one becomes available. 

      There will always be three or more advanced turners there to help, sharpen tools, and answer any questions.

      Open Shop is free, but the rental Portable Rest Room and our coffee and doughnuts cost money.  A $20 donation would help defray expenses.

      Requirements

      • Open for NWWT members only or potential members to talk
      • No charge for the session (donations for operating costs are appreciated)
      • Bring your  tools
      • Bring your  PPE (face shields, dust protection, ear protection)
      • NWWT follows the current COVID guidelines -- details HERE
      • If you have any COVID related symptoms, please stay home


      Show details

    • Sharpening Lathe Tools Class - Q2-2026

      • 28 Mar 2026
      • 9:00 AM - 3:00 PM
      • 24250 SW 65th Ave, Tualatin OR 97062.
      • 5
      • 1 registrant
      Register


      Sharpening Class


      Saturday, March 28th, 2026

      9:00am - 3:00pm

      Dave Wood's Shop
      24250 SW 65th Ave, Tualatin OR 97062.

      Course Objective:  

      Requirements and general information:

      • Students must be members of NWWT.
      • Class will be limited to 6 students.
      • Each student will have a fully equipped sharpening station.
      • Instructors are experienced NWWT members.
      • Students bring their own  tools and PPE (face shields, dust protection) Note: Students may use NWWT tool sets if needed.
      • Coffee and snacks will be provided, but bring your own lunch.

      Class Agenda:

      • The advantages and disadvantages of different tool steels
      • Overview of the common methods of sharpening: grinders, grinding wheels, sharpening systems, and accessories
      • Explain sharpening bowl gouges, spindle gouges, parting tools, scrapers, and skews
      • Sharpening time at your grinders - Sharpen your tools with help from instructors and coaches
      Show details

    • NWWT General Meeting - John Beechwood demonstrating "Tulips"

      • 02 Apr 2026
      • 7:00 PM - 9:00 PM
      • Remote Zoom meeting & MAC

      April 2, 2026 Meeting
      7:00pm - 9:00pm

      Hybrid Meeting - live at the MAC and on Zoom

      HERE


        Show details

      • NWWT Open Shop -- Dave Wood's Shop

        • 11 Apr 2026
        • 9:00 AM - 1:00 PM
        • 24250 SW 65th Ave, Tualatin OR 97062
        • 2
        • 5 registrants
        Register

        Open Shop is directed toward the new turner but all are welcome.  Bring a project you want help finishing.  Bring questions about methods, tools, designs or any other woodturning question.  There are seven lathes available for use.  Bring your own tools and wood or buy wood at the shop.  

        We will have three sharpening stations to help you perfect your sharpening technique. There is no more important topic for the new turner (or the old ones for that matter) than sharpening. 

        YOU DO NOT NEED TO REGISTER FOR OPEN SHOP

        Registration guarantees you use of a lathe, and others can use one when one becomes available. 

        There will always be three or more advanced turners there to help, sharpen tools, and answer any questions.

        Open Shop is free, but the rental Portable Rest Room and our coffee and doughnuts cost money.  A $20 donation would help defray expenses.

        Requirements

        • Open for NWWT members only or potential members to talk
        • No charge for the session (donations for operating costs are appreciated)
        • Bring your  tools
        • Bring your  PPE (face shields, dust protection, ear protection)
        • NWWT follows the current COVID guidelines -- details HERE
        • If you have any COVID related symptoms, please stay home


        Show details

      • Spindle Turning Basics Class -Q2-2026

        • 18 Apr 2026
        • 8:30 AM - 3:30 PM
        • 24250 SW 65th Ave, Tualatin OR 97062.
        • 6
        Register


        Spindle Turning Basics Class


        Saturday, April 18th, 2026

        8:30am - 3:30pm

        Dave Wood's Shop
        24250 SW 65th Ave, Tualatin OR 97062.

        Requirements and general information

        • Students must be members of NWWT
        • Class will be limited to 7 students - one per lathe
        • Instructors are experienced NWWT members
        • 4 Sharpening systems will be available
        • All wood will be supplied
        • Students bring their own PPE (face shields, dust protection)
        • Coffee and snacks will be provided, but bring your own lunch.
        Course Objective
        The primary objective of this course is to walk beginners through making basic spindle pieces such as a candle stick, honey dipper or simple toy. This course is targeted at people who have never turned wood, or who want to take a refresher course before advancing to the next level of spindle turning expertise.
        • 7 lathes available for students plus the instructor's lathe.
        • Class binder with notes and reference materials for all
        • Prerequisite woodturning skills: none required

        Agenda

        Morning

        • Sharpening the tools required for class with help from the instruction staff.
        • Mount a blank on the lathe and turn to a cylinder
        • Demonstrations and practice making coves and beads

        Lunch Hour – Demonstrations and Q&A session during lunch

        Afternoon
        • Continue practicing while making a basic spindle form.
        • Pick a second simple spindle project and turn.

        Tools you need

        Note: If you do not have any tools yet, loaner tools are available.  We recommend you wait until after the class to buy tools so you know what to buy, and what not to buy.

        • Spindle Roughing Gouge.
        • Spindle Gouge
        • Parting Tool
        Show details

      • Bowl Turning Basics Class - Q2-2026

        • 19 Apr 2026
        • 8:30 AM - 3:30 PM
        • 24250 SW 65th Ave, Tualatin OR 97062.
        • 4
        Register


        Bowl Turning Basics Class


        Sunday, April 19th, 2026

        8:30am - 3:30pm

        Dave Wood's Shop
        24250 SW 65th Ave, Tualatin OR 97062.

        Requirements and general information

        • Students must be members of NWWT
        • Class will be limited to 7 students - one per lathe
        • Instructors are experienced NWWT members
        • 4 Sharpening systems will be available
        • All wood will be supplied
        • Students bring their own PPE (face shields, dust protection)
        • Coffee and snacks will be provided, but bring your own lunch.
        Course Objective

        The primary objective of this course is to walk beginners through making a wooden bowl. This course is targeted at people who have never turned wood, or who want to take a refresher course before advancing on to the next level of bowl turning expertise.

        Prerequisite woodturning skills:  None required, 

        Agenda

        Morning

        • Sharpening the tools required for class with help from the instruction staff.
        • Mount a green blank between centers; flatten bowl bottom surface; cut a tenon
        • Mount blank in a chuck
        Lunch Hour – Demonstrations and Q&A session during lunch

        Afternoon
        • Instruction on the basic push-cut and pull-cut techniques
        • Cut the exterior shape and interior surface, and smooth with scraper
        • Reverse the bowl and finish cut the bottom
        • Start a second bowl (time permitting) to finish at home
        • Each student will take home one bowl and one blank for practice.

        Tools you need 

        Note:  If you do not have any tools yet, loaner tools are available. We recommend you wait until after the class to buy tools so you know what to buy and what not to buy.

        • Bowl Gouge:  ½” or 5/8”
        • Scraper:  left-hand French curve style for inside bowl surface. A round-nose scraper is acceptable.
        • Parting tool or Skew – for touching up tenons and recesses for bowl mounting
        Show details

      • NWWT General Meeting - Kevin Jesequel demonstrating "Hollow Forms"

        • 07 May 2026
        • 7:00 PM - 9:00 PM
        • Remote Zoom meeting & MAC

        May 7, 2026 Meeting
        7:00pm - 9:00pm

        Hybrid Meeting - live at the MAC and on Zoom

        HERE


          Show details

        • NWWT Open Shop -- Dave Wood's Shop

          • 09 May 2026
          • 9:00 AM - 1:00 PM
          • 24250 SW 65th Ave, Tualatin OR 97062
          • 4
          • 3 registrants
          Register

          Open Shop is directed toward the new turner but all are welcome.  Bring a project you want help finishing.  Bring questions about methods, tools, designs or any other woodturning question.  There are seven lathes available for use.  Bring your own tools and wood or buy wood at the shop.  

          We will have three sharpening stations to help you perfect your sharpening technique. There is no more important topic for the new turner (or the old ones for that matter) than sharpening. 

          YOU DO NOT NEED TO REGISTER FOR OPEN SHOP

          Registration guarantees you use of a lathe, and others can use one when one becomes available. 

          There will always be three or more advanced turners there to help, sharpen tools, and answer any questions.

          Open Shop is free, but the rental Portable Rest Room and our coffee and doughnuts cost money.  A $20 donation would help defray expenses.

          Requirements

          • Open for NWWT members only or potential members to talk
          • No charge for the session (donations for operating costs are appreciated)
          • Bring your  tools
          • Bring your  PPE (face shields, dust protection, ear protection)
          • NWWT follows the current COVID guidelines -- details HERE
          • If you have any COVID related symptoms, please stay home


          Show details

        • Bowl Turning 201 - Plate/Platter Class - Q2-2026

          • 16 May 2026
          • 8:30 AM - 4:00 PM
          • 24250 SW 65th Ave, Tualatin OR 97062.
          • 6
          Register


          Bowl Turning 201 - "Plate/Platter" Class


          Saturday, May 16th, 2026

          8:30am - 4:00pm

          Dave Wood's Shop
          24250 SW 65th Ave, Tualatin OR 97062.

          Requirements and general information

          • Students must be members of NWWT
          • Class will be limited to 7 students - one per lathe
          • Instructors are experienced NWWT members
          • 4 Sharpening systems will be available
          • All wood will be supplied
          • Students bring their own PPE (face shields, dust protection)
          • Coffee and snacks will be provided, but bring your own lunch.

          Course Objectives:  

          The primary objective of this course is to refine your skills in the finer details of bowl turning.  When you look at a bowl, your eye is very discerning.  You will learn optimal bowl shapes, rim designs, and base options.  Skills learned here will help you advance to the next level of expertise. 

          Each student should complete one piece in class. Sanding and finish application included, time permitting.

          Prerequisite Skills

          If you have not yet developed the skills below or are unsure, please attend an open shop and talk with one of the helpers before registering for this course.

          • Ability to prepare and mount a bowl blank between centers, and in a chuck using a tenon or a recess
          • Ability to shape the outside and inside of a bowl using a bowl gouge
          • Ability to use a scraper for finishing the inside of a bowl
          • Ability to complete a basic bowl except for sanding and applying finish

          Agenda

          Morning
          • Tune-up/sharpen tools for the class with help from the staff.
          • Presentation on advanced design and form concepts, shape, rims, bottoms
          • Review of bowl gouge grinds: 40/40, traditional (50°), bottom (65°-75°), Ellsworth, etc
          • Mounting options: when to use a tenon or recess
          • Turn a “once-turned” bowl through the finish-cutting stage with a green blank

          Lunch Hour:
          Additional Demonstrations and Q&A session during lunch

          Afternoon

          • Turn a roughed and dried blank supplied (or bring your own) to the point of final scraping:
          • Learn methods for truing warped tenon or recess for re-mounting
          • Learn methods of cutting thinner wall thickness
          • Learn methods of scraping thin-walled bowls
          • Discuss sanding and finishing options if time permits


          Tools to bring

          • Bowl gouge(s) – ½” or 5/8” are good sizes. If you have several with different grinds, bring them all.
          • Bowl scraper – left hand French curve style is ideal for inside, but a round-nose also works
          • Parting tool or skew for fine-tuning tenons/recesses
          Show details

        • Spindle Turning 201 -Lidded Box - Q2-2026

          • 17 May 2026
          • 8:30 AM - 4:00 PM
          • 24250 SW 65th Ave, Tualatin OR 97062.
          • 6
          • 1 registrant
          Register

          Spindle Turning 201 - "Lidded Box"  Class

          Sunday, May 17th, 2026

          8:30am - 4:00pm

          Dave Wood's Shop

          24250 SW 65th Ave, Tualatin OR 97062



          Requirements and general information

          • Students must be members of NWWT
          • Class will be limited to 7 students - one per lathe
          • Instructors are experienced NWWT members
          • 4 Sharpening systems will be available
          • All wood will be supplied
          • Students bring their own PPE (face shields, dust protection)
          • Coffee and snacks will be provided, but bring your own lunch

          Course Objectives
          The primary objective of this class is to teach additional spindle turning skills. There are a variety of techniques learned in this class that are applicable to many other types of turning projects. 

          We will introduce you to use of the skew in this class.

          Prerequisite Skills:  If you have not developed the skills described below or are unsure, attend an open shop session and discuss it with one of the helpers before registering for this course.  Skills required are:

          • Use of a rouging gouge to round square stock.
          •  Use of a spindle gouge to make beads and coves
          •  Use of a parting tool.

          Agenda

          • Sharpen all tools used for the class with help from the instruction staff.
          • Practice beads and coves with the spindle gouge as a warm-up exercise
          • Discussion of pepper mill designs from simple to more complex, hollowing techniques and tools

          Tools you need to bring

          • Spindle Roughing Gouge 1” or larger is ideal.  ¾” is ok.
          • Spindle gouge:  ½” or 3/8”.  Bring both if you have them
          • Parting tool: 1/8” diamond profile is very versatile, but thin kerf (1/16”) is also useful.
          • Small round-nose scraper or box scrapper
          • Skew: 1” or larger
          Show details

        • NWWT Open Shop -- Dave Wood's Shop

          • 13 Jun 2026
          • 9:00 AM - 1:00 PM
          • 24250 SW 65th Ave, Tualatin OR 97062
          • 4
          • 3 registrants
          Register

          Open Shop is directed toward the new turner but all are welcome.  Bring a project you want help finishing.  Bring questions about methods, tools, designs or any other woodturning question.  There are seven lathes available for use.  Bring your own tools and wood or buy wood at the shop.  

          We will have three sharpening stations to help you perfect your sharpening technique. There is no more important topic for the new turner (or the old ones for that matter) than sharpening. 

          YOU DO NOT NEED TO REGISTER FOR OPEN SHOP

          Registration guarantees you use of a lathe, and others can use one when one becomes available. 

          There will always be three or more advanced turners there to help, sharpen tools, and answer any questions.

          Open Shop is free, but the rental Portable Rest Room and our coffee and doughnuts cost money.  A $20 donation would help defray expenses.

          Requirements

          • Open for NWWT members only or potential members to talk
          • No charge for the session (donations for operating costs are appreciated)
          • Bring your  tools
          • Bring your  PPE (face shields, dust protection, ear protection)
          • NWWT follows the current COVID guidelines -- details HERE
          • If you have any COVID related symptoms, please stay home


          Show details

        Past events

        14 Feb 2026 NWWT Open Shop -- Dave Wood's Shop
        08 Feb 2026 Bowl Turning Basics Class - Q1-2026
        07 Feb 2026 Spindle Turning Basics Class -Q1-2026
        05 Feb 2026 NWWT February - Bill Karow - Texturing Wood
        24 Jan 2026 Sharpening Lathe Tools Class - Q1-2026
        18 Jan 2026 "Woodchucking 201" Class with Tom Willing
        10 Jan 2026 NWWT Open Shop -- Dave Wood's Shop
        08 Jan 2026 January 2026 - Annual Tool Swap & Libary Cart Reorg
        13 Dec 2025 NWWT Open Shop -- Dave Wood's Shop
        06 Dec 2025 Guilds in the Village - SHOW
        05 Dec 2025 Guilds in the Village = SHOW
        08 Nov 2025 NWWT Open Shop -- Dave Wood's Shop
        06 Nov 2025 NWWT November Meeting - Jason Goodrich - Turning small
        26 Oct 2025 Spindle Turning 201 -Peppermill - Q4-2025
        25 Oct 2025 Bowl Turning 201 -"Viking" Bowl - Q4-2025
        11 Oct 2025 NWWT Open Shop -- Dave Wood's Shop
        05 Oct 2025 Bowl Turning Basics Class - Q4-2025
        04 Oct 2025 Spindle Turning Basics Class -Q4-2025
        02 Oct 2025 NWWT October Meeting - Jimmie Allen - D-Way Tools
        20 Sep 2025 NWWT Sharpening Lathe Tools Class - Q4-2025
        13 Sep 2025 NWWT Open Shop -- Dave Wood's Shop
        04 Sep 2025 September General Meeting - Danny Bartlett - Trembleurs
        16 Aug 2025 Multnomah Days Booth
        09 Aug 2025 NWWT Open Shop -- Dave Wood's Shop
        02 Aug 2025 NWWT Annual BBQ and Auction
        19 Jul 2025 NWWT Open Shop -- Dave Wood's Shop
        03 Jul 2025 July General Meeting - NO MEETING
        14 Jun 2025 NWWT Open Shop -- Dave Wood's Shop
        05 Jun 2025 June General Meeting - Rick Rich Turmkreisel Tower Spinner
        18 May 2025 Spindle Turning 201 -Peppermill - Q2-2025
        17 May 2025 Bowl Turning 201 - Live Edge Class Bowl - Q2-2025
        10 May 2025 NWWT Open Shop -- Dave Wood's Shop
        01 May 2025 May General Meeting - Elizabeth Weber - Natural edge Bowls
        26 Apr 2025 Bowl Turning Basics Class - Q2-2025
        19 Apr 2025 Spindle Turning Basics Class -Q2-2025
        12 Apr 2025 NWWT Open Shop -- Dave Wood's Shop
        05 Apr 2025 Sharpening Lathe Tools Class - Q2-2025
        03 Apr 2025 April General Meeting - Neill Seigel – Multi-Axis Ladles
        30 Mar 2025 Spindle Turning 201 -Lidded Box - Q1-2025
        29 Mar 2025 Bowl Turning 201 - Live Edge Class - Q1-2025
        08 Mar 2025 NWWT Open Shop -- Dave Wood's Shop
        06 Mar 2025 March General Meeting - Tom Willing - Getting a Grip
        23 Feb 2025 Bowl Turning Basics Class - Q1-2025
        22 Feb 2025 Spindle Turning Basics Class -Q1-2025
        08 Feb 2025 Special Projects Course- Woodburning/Pyrography with Janice Levi, Q1-2025, Day 2 (Advanced)
        07 Feb 2025 Special Projects Course- Woodburning/Pyrography with Janice Levi, Q1-2025, Day 1 (Beginners)
        06 Feb 2025 February General Meeting - Janice Levi - Pyrography
        01 Feb 2025 NWWT Open Shop -- Dave Wood's Shop
        18 Jan 2025 Sharpening Lathe Tools Class - Q1-2025
        11 Jan 2025 NWWT Open Shop -- Dave Wood's Shop
        02 Jan 2025 January 2025 - Annual Tool Swap
        14 Dec 2024 NWWT Open Shop -- Dave Wood's Shop
        06 Dec 2024 Guilds in the Village - Show & Sale
        09 Nov 2024 NWWT Open Shop -- Dave Wood's Shop
        07 Nov 2024 November General Meeting - Jason Goodrich - Selling your work
        03 Nov 2024 Spindle Turning 201 - Lidded Box - Q4-2024
        02 Nov 2024 Bowl Turning 201 -Round Bottom Calabash - Q4-2024
        19 Oct 2024 NWWT Open Shop -- Dave Wood's Shop
        06 Oct 2024 Bowl Turning Basics Class - Q4-2024
        05 Oct 2024 Spindle Turning Basics Class -Q4-2024
        03 Oct 2024 October General Meeting - John Vaeth - Photographing your Work
        28 Sep 2024 NWWT Sharpening Lathe Tools Class - Q4-2024
        14 Sep 2024 NWWT Open Shop -- Dave Wood's Shop
        05 Sep 2024 September General Meeting - Mike Meredith - Threading
        10 Aug 2024 NWWT Open Shop -- Dave Wood's Shop
        03 Aug 2024 NWWT Annual BBQ and Auction
        13 Jul 2024 NWWT Open Shop -- Dave Wood's Shop
        04 Jul 2024 July 2024 Meeting - NO MEETING
        08 Jun 2024 NWWT Open Shop -- Dave Wood's Shop
        06 Jun 2024 June General Meeting - Rick Rich - 3 Leg Stool
        01 Jun 2024 Bowl Turning 201 -Round Bottom Calabash - Q2-2024
        11 May 2024 NWWT Open Shop -- Dave Wood's Shop
        02 May 2024 May General Meeting -Dr. Seri Robinson
        28 Apr 2024 Bowl Turning Basics Class - Q2-2024
        27 Apr 2024 Spindle Turning Basics Class -Q2-2024
        13 Apr 2024 NWWT Open Shop -- Dave Wood's Shop
        06 Apr 2024 NWWT Sharpening Class - Q2-2024
        04 Apr 2024 April General Meeting - Rob Vogtman
        17 Mar 2024 Spindle Turning 201 -Goblet Class - Q1-2024
        16 Mar 2024 Bowl Turning 201 - Plate/Platter Class - Q1-2024
        09 Mar 2024 NWWT Open Shop -- Dave Wood's Shop
        07 Mar 2024 March 2024 Meeting - Kevin Jesequel - Hollow Forms
        18 Feb 2024 Bowl Turning Basics Class - Q1-2024
        17 Feb 2024 Spindle Turning Basics Class -Q1-2024
        10 Feb 2024 NWWT Open Shop -- Dave Wood's Shop
        01 Feb 2024 February, 2024 Meeting - John Beechwood - Tulips
        27 Jan 2024 NWWT Sharpening Class - Q1-2024
        13 Jan 2024 NWWT Open Shop -- Dave Wood's Shop
        04 Jan 2024 January 2024 - Annual Tool Swap
        09 Dec 2023 Stuart Batty 2-day Class - Dec 9/10, 2023
        08 Dec 2023 Stuart Batty Beginners Class - Dec 8, 2023
        07 Dec 2023 December 2023 Meeting -Stuart Batty
        11 Nov 2023 NWWT Open Shop -- Dave Wood's Shop
        02 Nov 2023 November 2, 2023 Meeting -Dr. Seri Robinson
        29 Oct 2023 Bowl Turning 201 - Project Class Plate/Platter - Q4-2023
        28 Oct 2023 Spindle Turning 201 - Project: Pepper Mill - Q4-2023
        14 Oct 2023 NWWT Open Shop -- Dave Wood's Shop
        08 Oct 2023 Bowl Turning Basics Class - Q4-2023
        07 Oct 2023 Spindle Turning Basics Class -Q4-2023
        05 Oct 2023 October 2023 Meeting - Roger Crooks - Colored Platter
        23 Sep 2023 NWWT Sharpening Class - Q4-2023
        09 Sep 2023 NWWT Open Shop -- Dave Wood's Shop
        07 Sep 2023 September 2023 Meeting - John Sutter - Spiral Rosettes
        19 Aug 2023 Multnomah Days Booth
        05 Aug 2023 NWWT Annual BBQ and Auction
        08 Jul 2023 NWWT Open Shop -- Dave Wood's Shop
        06 Jul 2023 July 2023 Meeting - Steve Newberry - Turn a Teapot
        10 Jun 2023 NWWT Open Shop -- Dave Wood's Shop
        01 Jun 2023 June 2023 Meeting - Mike Meredith - "Hybrid” Turning Blanks
        13 May 2023 NWWT Open Shop --MAKE A PEN
        13 May 2023 NWWT Open Shop -- Dave Wood's Shop
        07 May 2023 Bowl Turning 201 - Live-Edge Bowl Class - Q2-2023
        06 May 2023 Spindle Turning 201 - Pepper Mill - Q2-2023
        04 May 2023 May 2023 Meeting - Mike Meredith - Finishing Options
        16 Apr 2023 Bowl Turning Basics Class - Q2-2023
        15 Apr 2023 Spindle Turning Basics Class -Q2-2023
        08 Apr 2023 NWWT Open Shop -- Dave Wood's Shop
        06 Apr 2023 April 2023 Meeting -Brad Williams – Stabilizing Wood and Turning Epoxy
        01 Apr 2023 NWWT Sharpening Class - Q2-2023
        11 Mar 2023 NWWT Open Shop -- Dave Wood's Shop
        09 Mar 2023 March 2023 Meeting - An Evening with Richard Raffan - DATE CHANGE
        02 Mar 2023 March 2023 Meeting - DATE CHANGE - See March 9
        26 Feb 2023 Bowl Turning 201 Class - Live-Edge Bowl - Q1-2023
        25 Feb 2023 Spindle Turning 201 - Lidded Box - Q1-2023
        11 Feb 2023 NWWT Open Shop -- Dave Wood's Shop
        05 Feb 2023 Bowl Turning Basics Class - Q1-2023
        04 Feb 2023 Spindle Turning Basics Class -Q1-2023
        02 Feb 2023 February, 2023 Meeting - John Beechwood - Peppermills
        21 Jan 2023 NWWT Sharpening Class - Q1-2023
        05 Jan 2023 January 2023 - Annual Tool Swap
        10 Dec 2022 NWWT Open Shop -- Dave Wood's Shop
        02 Dec 2022 Guilds of the Village - Show & Sale
        01 Dec 2022 December 2022 Meeting - No Meeting - Happy Holidays
        01 Dec 2022 Guilds of the Village - Show & Sale
        12 Nov 2022 NWWT Open Shop -- Dave Wood's Shop
        03 Nov 2022 November 2022 Meeting - Jimmie Allen - D-Way Tools
        29 Oct 2022 NWWT Sharpening Class - Q4-2022
        22 Oct 2022 Glenn Burki Tool Sale
        16 Oct 2022 Woodturning Projects - Lidded Box - Q4-2022
        15 Oct 2022 Bowl Turning 201 Class - Q4-2022
        08 Oct 2022 NWWT Open Shop -- Dave Wood's Shop
        06 Oct 2022 October 2022 Meeting - Jason Goodrich - Sea Urchin Ornament
        25 Sep 2022 Spindle Turning Basics Class -Q4-2022
        24 Sep 2022 Andy Johnson-Lairds wood auction
        24 Sep 2022 Bowl Turning Basics Class - Q4-2022
        10 Sep 2022 NWWT Open Shop -- Dave Wood's Shop
        01 Sep 2022 September 2022 Meeting - John Beechwood - Yarn Bowls
        13 Aug 2022 NWWT Open Shop -- Dave Wood's Shop
        06 Aug 2022 NWWT Annual BBQ and Auction
        16 Jul 2022 NWWT Open Shop -- Dave Wood's Shop
        07 Jul 2022 July 2022 Meeting - Rick Rich - Bon-Bon Dish
        11 Jun 2022 NWWT Open Shop -- Dave Wood's Shop
        04 Jun 2022 NWWT Sharpening Class - June 4
        02 Jun 2022 June 2022 Meeting - Ed Pretty - Butterfly Fixes
        21 May 2022 Bowl Turning Intermediate Class - May 21, 2022
        14 May 2022 NWWT Open Shop -- Dave Wood's Shop
        07 May 2022 Bowl Turning Basics Class - Q2-2022
        05 May 2022 May 2022 Meeting - Tom Willing - Egg Wagon
        09 Apr 2022 NWWT Open Shop - Dave Wood's Shop
        07 Apr 2022 April 2022 Meeting - Kevin Jesequel - Hollow Forms
        27 Mar 2022 Spindle Turning Intermediate Class - Q2-2022
        26 Mar 2022 Bowl Turning Intermediate Class - Q2-2022
        12 Mar 2022 NWWT Open Shop - Dave Wood's Shop
        05 Mar 2022 NWWT Sharpening Class - Q1-2022
        03 Mar 2022 March 2022 Meeting - Craig Timmerman - Torus Vase
        19 Feb 2022 NWWT - Turning Talk
        12 Feb 2022 NWWT Open Shop - Dave Wood's Shop
        06 Feb 2022 Spindle Turning Basics Class -Q1-2022
        05 Feb 2022 Bowl Turning Basics Class - Q1-2022
        03 Feb 2022 February 2022 Meeting - Chris Lawrence - Highrise Boxes
        22 Jan 2022 Spindle Turning Intermediate Class - Q1-2022
        15 Jan 2022 NWWT Open Shop - Dave Wood's Shop
        06 Jan 2022 January 2022 Meeting - Rick Urban - Lost Wood Art
        11 Dec 2021 NWWT Open Shop - Dave Wood's Shop
        04 Dec 2021 Sharpening Advanced Class - Fall 2021
        02 Dec 2021 December Meeting: NO MEETING - HAPPY HOLIDAYS
        13 Nov 2021 NWWT Open Shop - Dave Wood's Shop
        06 Nov 2021 Bowl Turning Intermediate Class - Fall 2021
        04 Nov 2021 November Meeting - Bill Karow - Embellishments
        24 Oct 2021 Spindle Turning Basics Class - Fall 2021
        23 Oct 2021 Bowl Turning Basics Class - Fall 2021
        09 Oct 2021 NWWT Open Shop - Dave Wood's Shop
        07 Oct 2021 October Meeting - Kirk DeHeer - Demystifying Cuts and Catches
        04 Sep 2021 NWWT Open Shop - Dave Wood's Shop
        02 Sep 2021 September Meeting - Dale Larson - Finish Turning a Bowl
        07 Aug 2021 NWWT Annual BBQ and Auction
        10 Jul 2021 NWWT Open Shop - Dave Wood's Shop
        01 Jul 2021 July Meeting - Dale Larson - Oval Bowls, Roger Crooks - Coloring
        05 Jun 2021 NWWT Open Shop - Dave Wood's Shop
        03 Jun 2021 June Meeting - Greg Gallegos - Podlets - Turning Thin
        22 May 2021 Bowl Turning Basics Course
        08 May 2021 NWWT Open Shop - Dave Wood's Shop
        06 May 2021 May Meeting: Roger Crooks - Square Useless Things
        01 May 2021 Sharpening Class
        17 Apr 2021 NWWT - Turning Talk - April 2021
        01 Apr 2021 April Meeting: David Ellsworth - Need We Say More
        20 Mar 2021 NWWT - Turning Talk - March 2021
        04 Mar 2021 March Meeting: Betty Simnitt - Basket Illusion Technique
        20 Feb 2021 NWWT - Turning Talk - February 2021
        04 Feb 2021 February Meeting: Michael Alguire - Intricate Hollow Forms
        16 Jan 2021 NWWT - Turning Talk - January 2021
        07 Jan 2021 January Meeting: Mike Meredith - Chainsaw Maintenance & Sharpening
        19 Dec 2020 NWWT - Turning Talk
        03 Dec 2020 December Meeting: NO MEETING - HAPPY HOLIDAYS
        21 Nov 2020 NWWT - Turning Talk
        05 Nov 2020 November Meeting: Kathleen Duncan - Piercing
        24 Oct 2020 Spindle Turning Basics Course
        17 Oct 2020 NWWT - Turning Talk
        01 Oct 2020 October Meeting: Steve Newberry - Kuska Cup
        26 Sep 2020 NWWT Store Open for Sales and Pickup
        19 Sep 2020 NWWT - Turning Talk
        06 Aug 2020 August General Meeting - Joe Fleming - Airbrushing
        02 Jul 2020 July Meeting: John Beechwood - Spiralling and Texturing
        04 Jun 2020 June Meeting: Dale Larson: Spheres Demo
        16 May 2020 NWWT - Turning Talk
        07 May 2020 May Meeting: Tom Wiling: On-Line Egg Demo
        18 Apr 2020 NWWT - Turning Talk

        Northwest Woodturners
        PO Box 1157
        Lake Oswego, OR 97035

         Northwest Woodturners is a 501(c)3 non-profit organization. 

        Powered by Wild Apricot Membership Software